Motor starter, generator starter & motor relæ
Monitor engine speed with Thiim engine relays. Check sync between generator and mains for synchronizing generator voltage to mains.
Thiim A/S offers you a compact design with possibilities for customization.
Starter inhibit and over-speed
Those relays are designed for automatic start of petrol, gas or diesel engines and to prevent engine damage due to failure in the automatic speed control system.
The relays are very accurate monitoring the frequency from either a magnetic pick-up, a tacho generator or the main generator.
Automatic starters for engines in generator sets, refrigerators and pump units.
Syncronizers
The synchro check relay type SYND is a multifunction unit that can be set to both constant or pulse output as well as to enable or disable synchronization to a “dead bus”.
The unit is designed with a micro controller to monitor the bus and the generator voltage, as well as the phase differential between two grids. The SYND ensure the right conditions before the connection of the generator to the bus, in order to avoid damage to the generator and malfunction or damage to the connected equipment.
The unit is specially designed for DIN rail mounting on the base of the control box for an easy connection to the two bus systems. For a front panel indication of the function, the SYND can be connected through a simple three wire digital interface to the optional panel indicator type SYPD.
Starter inhibit
The starter inhibit relays are designed to be used with petrol, gas or diesel engines.
FAAA and FXAA are used to inhibit the starter as soon as the engine runs by itself. The relays accurately monitor the frequency from either a magnetic pick-up, a tacho generator or the main generator.
Automatic starters for engines in generator sets, refrigerators and pump units.
Over-speed
The over-speed relays are designed to be used with petrol, gas or diesel engines.
FABA and FXBA are used to prevent engine damage due to failure in the automatic speed control system. The relays accurately monitor the frequency from either a magnetic pick-up, a tacho generator or the main generator.
Automatic starters for engines in generator sets, refrigerators and pump units.
